Application of different types of motor-axle bearings of locomotive wheel-motor units in the Far North

   Improvements in locomotive wheel-motor unit (WMU) design over the last decade have been made in terms of the transition to rolling motor-axle bearings (MAB) instead of plain bearings, which was the basis for the proposed study.

   The study is aimed to provide a theoretical estimation of power losses in different types of locomotive WMU MAB and its validation depending on heating temperature and bearing specifications.

   The study is aimed to determine power losses in MABs using new approaches to their determination.

   New methods of determining the power losses in the plain and rolling MABs of locomotive WMUs are suggested. These methods allow calculating the values of power losses depending on the specifications of MAB and its heating temperature. Depending on the bearing heating temperature, recommendations are provided with regard to operating conditions of a particular type of locomotive WMU bearing. It is recommended to operate motor-axle plain bearings in the temperature range of 10 to 20 °C, and rolling bearings from 20 °C and above. The suggested methodologies for calculating power losses of locomotive WMU MABs can be used to determine the energy efficiency of a given drive type, taking into account the type of the grease, its temperature, design features and operating conditions. The obtained results can serve as recommendations for the selection of the type of MAB.

1. Kulabukhov V. I., Kulabukhov A. V., Timakov M. V. Qualitative and quantitative assessment of axle roller bearings application on the example of TEM18 diesel locomotive. Bulletin of the All-Russian Research and Design Institute of Electric Locomotive Building. 2015; 1 (69): 175-185. (In Russ.).

2. Cui W., Raza K., Zhao Z., Yu C., Tao L. et al. Role of transfer film formation on the tribological properties of polymeric composite materials and spherical plain bearing at low temperatures // Tribology International. 2020. No. 152. P. 106569. DOI: 10.1016/j.triboint.2020.106569

3. Rodichev A., Novikov A., Gorin A., Tokmakova M. Analysis of the wear resistance of a hard anti-friction coating, applied to a plain bearing, under the conditions of boundary friction // Transportation Research Procedia. 2021. No. 57. Pp. 573–580. DOI: 10.1016/j.trpro.2021.09.086

4. Kasai M., Fillon M., Bouyer J., Jarny S. Influence of lubricants on plain bearing performance: Evaluation of bearing performance with polymer-containing oils // Tribology International. 2012. No. 46 (1). Pp. 190–199. DOI: 10.1016/j.triboint.2011.03.009

5. Mansoor Y., Shayler P. The effect of oil feed pressure on the friction torque of plain bearings under light, steady loads // Tribology International. 2018. Vol. 119. Pp. 316–328. doi: 10.1016/j.triboint.2017.11.013

6. Osipov A. V., Kurilkin D. N., Dvorkin P. V., Kulesh R. V. Estimation of power losses in motor-axial plain bearings of traction rolling stock. Bulletin of transport of the Volga region. 2022; 2 (92): 23-30. (In Russ.).

7. Myshkin N. K., Petrokovets M. I. Friction, lubrication, wear. Physical foundations and technical applications of tribology. Moscow, FIZMATLIT, 2007; 368. (In Russ.).

8. Kuz′min A. V., Chernin I. M., Kozintsov B. S. Calculations of machine parts: reference guide. Minsk, Higher School, 1986; 399. (In Russ.).

9. Kurilkin D. N. Determination of parameters of traction and energy characteristics of autonomous locomotives according to microprocessor control and diagnostic systems: monograph. St. Petersburg, ID-T-PRESSA, 2022; 160. (In Russ.).

10. Patent RU No. 146099U1, IPC B61C 9/50. Wheel-motor unit / E. S. Vasyukov, O. A. Chernyavsky, N. V. Romanenkov, T. V. Reznikova, A. Yu. Mayevsky, V. N. Pichugin, S. V. Fedkin, A. S. Kulabukhov; patent holder CJSC Management Company Bryansk Machine-Building Plant; No. 2013147128/11 application dated 22. 10. 2013; publ. 09/27/2.

11. Skalin A. V., Kononov V. E., Bukhteev V. F., Ibragimov M. A. The crew of locomotives. Construction, durability, repair. Moscow, Zheldorizdat, 2008; 304. (In Russ.).

12. Astakhov V. N., Lysikov E. N., Konovalov P. E. Evaluation of friction and lubrication modes in locomotive axial suspension bearings. Science and Progress of Transport. Bulletin of the Dnepropetrovsk National University of Railway Transport. 2012; 40: 55-62. (In Russ.).