Innovative energy sources for Hyperloop high-speed transport
https://doi.org/10.46684/2022.1.1
Abstract
This article describes an innovative design of a solar-wind generator for a distributed energy Hyperloop high-speed system. The knowhow of this development is to mount flexible silicon solar panels (SP) on wind turbine blades, thus optimizing the thermal efficiency of solar panels. The basic dimensions of the wind turbine blades and the maximum internal flow velocities at the blade outlet (tips) are presented. At low wind velocities, it is rational to locate solar panels on the outer end (or the tip) of a blade, rather than along the blade length.
The cooling effect can be increased by using materials with low thermal resistance for the SP and blades, or by reducing their thickness.
To increase the heat transfer coefficient, it is recommended to use the airflow turbulence on the solar panel surface. In practice, this can be achieved both by changing the operating parameters and by introducing innovative design solutions.
For better cooling of solar panels, it is recommended to use the technology of a wind flow sucked into the blade inner cavity. Changing the geometry of the outer end (tip) of the blades and the use of deflectors also give a better panel cooling parameters.
About the Authors
K. K. KimRussian Federation
Konstantin K. Kim — Head of the Department of “Electrical Engineering and Heat Power Engineering”
SPIN-code: 3278-4938, ID RSCI: 690443, Scopus: 57196471944, ResearcherID: ABH-4480-2020
9 Moskovsky pr., St. Petersburg, 190031
A. Yu. Panychev
Russian Federation
Alexander Yu. Panychev — Rector
SPIN-code: 5255-1882, ID RSCI: 404314, Scopus: 57190226949, ResearcherID: G-7878-2018
9 Moskovsky pr., St. Petersburg, 190031
L. S. Blazhko
Russian Federation
Lyudmila S. Blazhko — First Vice-Rector, Vice-Rector for Academic Affairs
SPIN-code: 8522-5224, ID RSCI: 275525, Scopus: 57190230361
9 Moskovsky pr., St. Petersburg, 190031
References
1. Kim K.K. A variant of the vacuum transport system. Railway Transport. 2016;12:67-68. (In Russ.).
2. Kim K.K., Kim K.I. Suspension system of hyper loop Transportation Systems and Technology. 2017;3(2):9-10. DOI: 10.17816/transsyst2017329-10
3. Certificate for utility model RU No. 24670 MKI37 B61D17/00, B61D 25/00. The body of the head car of a high-speed train. Applicant and patent holder Emperor Alexander I St. Petersburg State Transport University; application No. 2001135610/20 12/26/2001; publ. on 04/24/20. BulletinNo. 12.
4. Patent RU No. 197430 MKI37 F03D 9/25, H02S 10/12. Wind generator. Applicant and patent holder Emperor Alexander I St. Petersburg State Transport University; application No. 2019139281 12/02/2019; publ. on 24/04/2020. Bulletin No. 12.
5. Gulkov V.N., Kolesnichenko I.D., Korotkov K.E. Investigation of the effect of heating solar modules on the efficiency of radiation conversion. Proceedings of Saint Petersburg Electrotechnical University. 2019;1:10-16. (In Russ.).
6. Eurasian patent 040487 IPC F03D1/00, F03D9/00. Wind generator. Applicant and patent holder Emperor Alexander I St. Petersburg State Transport University; application No. 202100092 08.26.2021; publ. on 09/06/2022.
7. Kim K., Panychev A., Blazhko L. Increasing the Efficiency of Thin-Film Silicon Solar Panels. International Scientific Siberian Transport Forum TransSiberia–2021. 2022;1560-1568. DOI: 10.1007/978-3-030-96383-5_174
Supplementary files
Review
For citations:
Kim K.K., Panychev A.Yu., Blazhko L.S. Innovative energy sources for Hyperloop high-speed transport. BRIСS Transport. 2022;1(1). https://doi.org/10.46684/2022.1.1